Software

Some specific software is required for setting up the Open Telecare Initiative digital vault besides the standard Kamikaze packages. I have created a number of packages for installation on a Kamikaze 8.09.1 system running on the ASUS WL-500G Premium hardware.
Recently, I have started using a Linksys WRT160NL running Backfire 10.03.1-rc3. The packages for these systems have shown to work.
Packages are provided “as is” without any warranty or support.

Disclaimer of warranty

Please do not download software from this page unless you have read the paragraph below and agree to it.

I disclaim all warranties, either express or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. This means that if you download software from this page you agree that I have no liability for any damages that you incur when using it, whether or not those damages are caused by a problem with the software, and whether or not you have brought such problems to my attention.

Packages for WL-500G Premium, Kamikaze 8.09.1

This package contains cross-compiled code of the readnon program. This program reads the serial data from the Nonin 4100 over the bluetooth link. For more details, refer to the Knowledge Base section.

This package contains cross-compiled code of the nonproc program. This program converts the raw data that have been obtained by readnon into a line of ASCII describing date and time of measurement, oxigen saturation and heart reate

This package contains cross-compiled code of the fly program. Fly was written by Martin Gleeson. The program generated graphs in the *.png and *.jpg formats from data in an ASCII file. I obtained the source code from http://www.sfr-fresh.com/unix/www/fly-2.0.1.tar.gz/. There you will also find the copyright information. Also see http://martin.gleeson.net/fly/ for documentation. Fly requires that libgd, libpng, libjpeg and libfreetype libraries have been installed.

openobex_1.3-1_mipsel.ipk
md5sum 44516e3342e150d4775de227889f6f8a

This package contains cross-compiled code of the openobex library. This library is required for using obexftp to transfer files over bluetooth. I obtained the source code from http://sourceforge.net/projects/openobex/files/openobex/1.3/openobex-1.3.tar.gz/download. More information is available at http://dev.zuckschwerdt.org/openobex/wiki/ObexProjects . Openobex requires that the bluez infrastructure is working correctly.

This package contains cross-compiled code of version 0.22 of the the obexftp application. Obexftp is intended for making mobile devices that feature the OBEX protocol and that adhere to the OBEX FTP standard accessible using an open source implementation.
Source code is available from sourceforge.net, but also through this openobex wiki http://dev.zuckschwerdt.org/openobex/wiki/ObexDownloads.
The idea is that the OTI Digital Vault can send information to a mobile phone and that this is a convenient alternative for using a computer to communicate with the Vault in the home environment.

This package contains cross-compiled code of the software needed for capturing data with the TMSi Telecare Mobi. After installation use single_channel -h and multi_channel -h for usage info. Sourcecode is available through support@tmsi.com

Packages for WRT160LN, Backfire 10.03.1-rc3

This package contains cross-compiled code of the openobex library. For further details, see above.

This package contains cross-compiled code of version 0.22 of the the obexftp application. For further details see above.

The mobi6 package, see details above.

Back